Extron Electronics DMP 44 LC User Guide - Manual (Page 9)

• 16 DSP Configurator presets — Using the DSP Configurator software, parameters
for DSP processing, signal levels, or audio routing can be saved as presets. These
settings can be saved for the entire system, or any selected group of inputs, outputs,
mixing points, and DSP blocks.
• Group masters — The DMP 44 LC provides the capability to consolidate gain or
mute control throughout the system. Any gain or mute block within the graphical
user environment can be selected and added to a group master, which can then be
controlled by a single master fader and mute control. Sixteen group master controls
are provided. Each group master can have up to eight members.
• Soft limits provide optimal group master adjustment range — The group master
volume range can be limited using soft limits to maintain optimal minimum and
maximum levels when using external volume control. This prevents operators from
over- or under-adjusting levels.
• Flexible control options — The DMP 44 LC can be controlled using the
DSP Configurator software and a PC connection to the RS-232 serial port, or to the
USB 2.0 port on the front panel.
• Front panel USB configuration port — Enables configuration without having to
access the rear panel.
• RS-232 serial control port — Using serial commands, the DMP 44 LC can be
integrated into third-party control systems using SIS
commands.
• Versatile mounting options — Rack-mountable 1U, quarter rack width metal
enclosure.
DMP 44 LC • Introduction 3