Elmo Rietschle 2FC4...-1CB - Manual (Page 14)

4 Product identification
610.00260.40.000 · 05.2014 14 / 74 © Gardner Denver Deutschland GmbH
Product identification
Model description
Item designation
1 2FC = drive control 4 Type of assembly:
1 = integrated drive control
2 Connection voltage:
4 = 400 V -15% — 480 V +10%
5 Version:
ST = Standard
PB = Profibus
PB = Profinet
SC = Sercos III
CB = CANopen
3 Performance:
152 = 1.5 kW
222 = 2.2 kW
302 = 3.0 kW
402 = 4.0 kW
552 = 5.5 kW
752 = 7.5 kW
6 reserved:
0 = Standard
Description of the drive control
The drive control is a device for speed control in three-phase AC motors.
The drive control can be integrated in the motor (with the standard adapter plate)
or fitted close to the motor (with the wall installation adapter plate).
The permitted ambient temperatures specified in the technical data refer to opera-
tion at nominal load. In many cases, higher temperatures may be permitted after a
detailed technical analysis. These have to be approved by manufacturer on a
case-by-case basis.
CE marking
With the CE marking, we, as the manufacturer of the device, confirm that the drive
control meets the basic requirements of the following guidelines:
▪ Directive on Electromagnetic Compatibility (Directive 2004/108/EC)
▪ Low Voltage Directive (Directive 2006/95/EC)
You can download the declaration of conformity from www.gd-elmorietschle.com.
4
4.1
4.2
4.3