B&K Precision XLN60026 - Manual - Manual (Page 24)

17
L
=
F L
L =
=
L
L
L
BEEP:
Turns the Buzzer ON/OFF
LCD BACKLIT:
Set the backlight of the LCD to Always
ON or OFF after 1/5/10/30 minutes
RECALL DEFAULT:
Restores the manufacturer default
settings
.
F F =
F
=
,
=
.
F
=
,
F F
5
=
Ext 5V OUTPUT:
Turns the extra 5V power output (on the rear
panel) ON/OFF.
POWER ON STATE:
Users can set the output state of the supply
when powered on. When OFF is selected, the
XLN series will do nothing after power on. If
LAST is selected, then at power on the
supply will use the last setting before it
turned off previously. If USER (user defined)
is selected, a prompt will ask for setting
output voltage, current, and output state.
Once set, these values are then used the next
time the supply is powered on.
HOT KEY:
Set the HOT KEY function ON/OFF. If the
HOT KEY function is ON, user can use 0 – 9
number keys to recall the voltage and current
HOT KEY = OFF