MoTeC PWC Plug-In ECU - Manual (Page 76)

MoTeC Appendices 69
Pin List by Function
M400 Pin Hydro S4 Pin Function
Power
VBAT A26 C08,C09 12 V Switched (System Relay), Lambda
Heater Supply
GND A10 C02,D04 ECU Earth, Ignition Module Earth
GND A11 C21 ECU Earth
8V ENG A12 not used Optional: 8 V to SKM Module
5V ENG A02 C30 5 V Sensor Supply, Optional: GPS Power
0V ENG B16 G01,M01 0 V Sensor Supply
8V AUX A13 E03 8 V to CAN Connector
5V AUX A09 not used 5 V Sensor Supply, Optional: GPS Power
0V AUX B15 C06 0 V Sensor Supply
0V COMM B14 E01,F01 0 V for CAN and SLM devices
Outputs
Inj1 A19 C31 Injector Cylinder 1
Inj2 A20 C32 Injector Cylinder 2
Inj3 A21 not used Injector Cylinder 4
Inj4 A22 not used Injector Cylinder 3
Inj5 A27 not used Not Available in M400
Inj6 A28 not used Not Available in M400
Inj7 A29 not used Not Available in M400,M600
Inj8 A30 not used Not Available in M400,M600
Optional: Available for Knock Module
SKM - Knock Window
Ign1 A03 D07 Coil 1 Trigger to BIM200 Module
Ign2 A04 D02 Coil 2 Trigger to BIM200 Module
Ign3 A05 not used
Ign4 A06 not used