Biamp A4 - Manual (Page 121)

Component Objects
Mic Options opens a separate control dialog box to
establish global settings.
Designated Mic On / Last Mic Hold determines which
microphone (if any) will stay/become active when no
signal is present. Logic Outputs Follow Mic Logic
assigns logic outputs to follow Designated Mic On / Last
Mic Hold. Open Mic Limits enables (and designates) a
maximum allowable number of active microphones.
Right-clicking over Ch / Bus assignments allows selection
of two additional dialog boxes.
Channel Settings affects individual channel settings,
but may be applied to all channels. Manual turns on/off
channel gating. NOM Gain turns on/off channel
contribution to NOM (number of open mics) attenuation.
Direct Output
designates channel direct output signal
as Post Gate / Pre NOM, Post Gate / Post NOM, or Off.
(Direct Outputs must be enabled when placing Auto
Mixers from the Object Toolbar.) Set All causes current
Channel Settings to be applied to all channels. Off
Attenuation
determines the amount of attenuation
applied when channel is inactive. Gate Hold Time
determines length of time before channel becomes
inactive, once signal is no longer present.
Logic Outputs affects individual Logic Output settings, but
may be applied to all Logic Outputs. (Logic Outputs must be
designated when placing Auto Mixers from the Object
Toolbar). Logic Output selects Follow Gate, On, or Off
condition of the Logic Output. Invert reverses operation of
the Logic Output (off when channel active). Set All causes
current Logic Output settings to be applied to all channels.
107