Biamp A4 - Manual (Page 73)

Software Tools
Equipment Table
Provides a table of NEXIA devices used in the system design. Devices are automatically added
to the Equipment Table whenever
CS , PM , SP , VC , or TC blocks are placed into the Layout.
When connected to the network , specific hardware devices may be chosen (by Serial #) for use
in the system. When connected to the system , Serial # and Device Description Label becomes
'read-only' information.
An RCB tab at the lower-left of the Equipment Table dialog box provides an editable table of
devices connected to the
Remote Control Bus of the NEXIA devices in the system design. This
table is used to establish proper association between external physical controls and their
corresponding component counterparts in the layout. Each DevID (control component) should
be matched to an appropriate Serial # (physical control). The DevID number can be found in the
right corner of control component objects in the layout, when 'Display Device Assignment in
DSP Block Info Field' is selected from
Display Options . Serial # and Device Description Label
information can be found for the physical controls using Device Maintenance .
Object Inspector
Provides a list of all objects within the Layout, along with their Object Codes,
Text Labels, Unit numbers, Instance ID numbers, and Instance ID Tags.
59