Biamp A4 User Manual
Page 57
Software Tools
RCB Devices
opens a list of devices connected to the
of the selected
NEXIA device. Identify Device causes indicators on the selected device to flash (for physical
location). Set Device Description allows the selected device be given a custom name. Calibrate
is enabled only if a
(VCB) is the selected device (see
).
Update Firmware
allows future firmware updates to be loaded into the selected device. The
information in this list (including Serial #) is used to establish proper association between the
external physical controls and their corresponding component counterparts in the layout (see
).
Remote Ethernet Devices opens a list of any NPS-1 or RED-1 remote Ethernet devices
connected to the control network of the selected Nexia device.
43