CognitiveTPG A798 - Manual (Page 82)

Chapter 4: Programming Commands 82 Revision C 12/09
A798-PG00001C
Recognizing data from the printer
An application sending various real time and non-real time commands to which the printer responds can determine which
command a response belongs to by the table below.
Responses to transmit peripheral device status (1B 75) and transmit paper sensor status (1B 76) are non-real time
responses and will arrive in the order in which they were solicited.
Batch mode response Response recognized by:
ASCII HEX
ECS u 0 1B 75 0 0 0 0 0 0 0 x x Binary
ESC v 1B 76 0 x x 0 0 x x x Binary
GS I n 1D 49 n 0 x x 0 x x x x Binary
GS r n 1D 72 n 0 x x 0 x x x x Binary
Real time response Response recognized by:
ASCII HEX
GS EOT n 1D 04 n 0 x x 1 x x 1 0 Binary
DLE EOT n 10 04 n 0 x x 1 x x 1 0 Binary
GS ENQ 1D 05 1 x x x x x x x Binary
XON 0 0 0 1 0 0 0 1 Binary
XOFF 0 0 0 1 0 0 1 1 Binary
Unsolicited status mode (USM) Response recognized by:
USM Byte 1 0 x x 1 x x 0 0 Binary
USM Byte 2-4 0 x x 0 x x x x Binary