Liquid Controls DMS Setup - Manual (Page 5)

5
DMS i1000 i1000 System Components
Typical vehicle delivery system components:
Metering System
Metering system is typically mounted to the back or
side of the delivery vehicle and measures the flow of
product being delivered. Components of this system
can include the meter, electronic register, strainer, air
eliminator, and control valve.
DMS i1000 Module
DMS i1000 Module provides connections for the
printer, DMS i1000 Lap Pad, electronic registers,
and a USB flash memory (optional). Powered from
the vehicle’s accessory panel and often mounted on
support brackets in the cab of the vehicle.
DMS i1000 Lap Pad
DMS i1000 Lap Pad is the user interface device which
allows initial set up and calibration of the system and
an interface for daily deliveries.
Printer
Printer is used to print out a record of the delivery. This
ticket is typically a multi-layer ticket providing a copy
with the customer and a copy retained for physical
record of the delivery.
Epson Slip Printer
M-10 Meter with LectroCount LCR-II Electronic
Register, Optical Air Eliminator, Hi Capacity Strainer,
and E-7 Valve.
DMS i1000 Lap Pad
Support Brackets
DMS i1000 Module