Dms i1000 lap pad setup – Liquid Controls DMS Setup User Manual
Page 7
7
DMS i1000 Lap Pad Setup
DMS i1000 Lap Pad Setup
The DMS i1000 i1000 Lap Pad is the user interface
device for the DMS i1000 i1000. In the DMS i1000 i1000
Lap Pad Setup screen, you can change the settings for
the lap pad’s operation and display. While this screen is
loaded, the DMS i1000 i1000 Lap Pad is off line with the
DMS i1000 i1000.
To access the DMS i1000 i1000 Lap Pad Setup:
Press and hold the
ALT and ENTER keys
simultaneously.
In the setup screen, the active field is displayed in reverse
video. For example, in the example to the left,
Adjust
Contrast is the active option. Pressing ENTER drops the
active field to the next item. From the bottom option, the
active field simply wraps back to the top option.
Adjust Contrast with and
Alters the DMS i1000 i1000 Lap Pad display for optimal
viewing. The up arrow increases the contrast; the down
arrow decreases the contrast.
Backlight:
Turns the light behind the display on and off. Use either
arrow key to change the setting.
Blink Cursor?
Switches the cursor display between solid and blinking.
If set to
Yes, the blink rate is 250 ms.
Auto Repeat:
Enables or disables auto repeat when a key is held down.
If set to
On, the character being held down will start to
repeat after 250 ms and repeat again every 50 ms.
CR and LF as Graphic?
This option is used to turn the CR/LF graphic on or off.
This field should be set to
Yes, when used with a DMS
i1000 i1000 application. If the Lap Pad is being used as
a standard terminal device, for example, processing DOS
command lines, this field should be set to
No.
Exiting the Lap Pad Setup
Press
ESC to exit the DMS i1000 i1000 Lap Pad setup
and reestablish communication with the host computer
(DMS i1000 i1000). The values entered will be retained
each time the unit is powered up.
DMS i1000 i1000 Lap Pad
DMS i1000 Lap Pad Setup Screen
On
Yes
Off
Yes
DMS i1000 Lap Pad Setup v.1.00
(c) Liquid Controls LLC 2005
Adjust Contrast with and
Backlight:
Blink Cursor?
Auto Repeat:
CR and LF as Graphic?
Press ESC to exit.