Liquid Controls Sponsler T675 - Cryogenic System Register - Manual (Page 19)

Sponsler, Inc. Model T675 Flow Totalizer Technical Information Pg. 16
3.3 – CHANGE SYSTEM SETTINGS:
Accesses the T675 Settings menu which consists of 9 settings choices that constitute all operating parameters that are
programmable. This option requires a passcode. The level of the passcode entered determines which settings are
available for configuration of the T675. A passcode of 77468 will allow access to only the Printer type option. Once the
passcode is entered properly, the system indicates the user's access level, Privileged, Weights and Measures, or
Printer.
3.3.1 675 Settings Menu Page 1
The system settings menu consists of 2 pages permitting the user to customize the T675 for the application. The On/OFF
pushbutton is disabled during the system setup. To exit the Setup menu depress the RESET/ESC key. Note that some
settings discussed will be unavailable at the User passcode level and will show up as ‘N/A’.
Depress the corresponding category number in the left column, entry is automatic.
********* 675 Settings, Page 1 *********
1 – Flowmeter size
2 – Alarm and Timer settings
3 – Serial numbers
4 – User passcode
5 – Maintenance
& 6 – Printer type
7 – System alarm log
8 – System activity
* 9 – Initialize system
0 – Goto page 2
Enter setting (ESC to exit)?
& Also accessible with “77468” passcode (item 6)
* Privileged passcode is required (items 5 and 8).
Note: When using printer passcode of 77468 proceed directly to section 3.3.2.1.4 on page 29.