PASCO EM-8656 AC_DC ELECTRONICS LABORATORY User Manual
Page 80
Advertising
76
AC/DC Electronics Laboratory
012-05892A
®
➃
Click the “STOP” button.
➄
Click the “Data Snapshot” button (
) for the “B” channel. Enter Data Cache Information for
“Long Name”, “Short Name”, and Units as needed to save the data for analysis.
➅
Click the “OFF” button (
) in the Signal Generator window.
➆
Put the 10
Ω
resistor in parallel with the 100
Ω
resistor and the 470
µ
F capacitor. The 10
Ω
resistor simulates a motor or small light bulb.
➇
Click the “ON” button (
) in the Signal Generator window.
➈
Click the “MON” button (
) to begin data monitoring.
➉
Click the “STOP” button.
11
Click the “Data Snapshot” button (
) for the “B” channel. Enter Data Cache Information for
“Long Name”, “Short Name”, and Units as needed to save the data for analysis.
Advertising