PASCO EM-8656 AC_DC ELECTRONICS LABORATORY - Manual (Page 84)

80
AC/DC Electronics Laboratory 012-05892A
®
• The top trace is the voltage across the “load” resistor. (The other trace is the Output Voltage.)
➃
Click the “STOP” button.
➄
Click the “Data Snapshot” button ( ) for the “B” channel. Enter Data Cache Information for
“Long Name”, “Short Name”, and Units as needed to save the data for analysis.
➅ Click the “OFF” button ( ) in the Signal Generator window.
➆ Put the 470
µ
F capacitor in parallel with the 100
Ω
resistor.
➇
Click the “ON” button ( ) in the Signal Generator window.