IEI Integration KINO-DH810 - Manual (Page 68)

KINO-DH810
P a g e 56
Figure 4-9: DVI Connector
S te p 4: Secure the connector. Secure the DVI connector from the digital display device
to the external interface by tightening the two retention screws on either side of
the connector.
4.5.3 LAN Co n n e c tio n
There are two external RJ-45 LAN connectors. The RJ-45 connector enables connection
to an external network. To connect a LAN cable with an RJ-45 connector, please follow
the instructions below.
S te p 1: Locate the RJ-45 connectors. The locations of the LAN connectors are shown
in Chapter 3.
S te p 2: Align the connectors. Align the RJ-45 connector on the LAN cable with one of
the RJ-45 connectors on the KINO-DH810. See Figure 4-10.