7 jumper settings, 1 access the jumpers – IEI Integration AFL-F08A v2.10 User Manual
Page 31
![background image](/manuals/356407/31/background.png)
AFL-F08A-N270 Panel PC
Page 19
3.7 Jumper Settings
NOTE:
A jumper is a metal bridge used to close
an electrical circuit. It consists of two or
three metal pins and a small metal clip
(often protected by a plastic cover) that
slides over the pins to connect them. To
CLOSE/SHORT a jumper means
connecting the pins of the jumper with
the plastic clip and to OPEN a jumper means removing the plastic clip
from a jumper.
The following jumpers and switches can be changed after removing the rear cover.
Description
Label
Type
Clear CMOS
J_COMS1
2-pin header
COM1 Pin 9 setting
JP8
10-pin header
COM3 Pin 9 setting
JP10
6-pin header
COM3 RX RS-232/422/485 select
JP9
8-pin header
COM3 TX RS-422/485 select
JP11
6-pin header
COM3 RS-232/422/485 select
JP6
12-pin header
Table 3-1: Jumpers
3.7.1 Access the Jumpers
To access the jumpers, remove the back cover. To remove the back cover, please refer to
Section
510H510H
3.4
.
- UPC-V312-D525 v1.02
- UPC-V312-D525 v1.10
- UPC-12A_GM45 v1.00
- UPC-12A_GM45 v2.00
- UPC-12A_GM45 v2.10
- UPC-V315-NM70
- UPC-V315-Screw Driver
- UPC-V315-QM77
- S12ASR v1.12
- S12ASR v3.00
- PPC-5xxx-9455 v1.00
- PPC-5xxx-9455 v1.10
- PPC-WIDS-51xxA-G41
- PPC-51xxA-H61
- PPC-5152-D525 v1.02
- PPC-5152-D525 v2.10
- PPC-37xxA-N26 v1.00
- PPC-37xxA-N26 v1.10
- PPC-37xx-N270 v1.01
- PPC-37xx-N270 v2.00
- PPC-37xx-N270 v2.11
- PPC-37xx-N270 v2.20
- ACT-457A
- AFL-4 series-N270 v1.05
- AFL-4 series-N270 v2.10
- AFL-4 series-N270 v2.11
- AFL-4 series-N270 v2.20
- AFL-W19A_W19B_17D_W15A-GM45 v2.10
- AFL-W19A_W19B_17D_W15A-GM45 v1.06
- AFL-W19A_W19B_17D_W15A-GM45 v2.20
- AFL-W15A_17D-GM45 v3.00
- AFL-15i-HM55 v1.01
- AFL-19i-HM55 v2.00
- AFL-15i-HM55 v1.20
- AFL-W19A_W19B_17D_W15A-N270 v1.06
- AFL-W19A_W19B_17D_W15A-N270 v2.20
- AFL-W19A_17D_W15A-N270 v3.00
- AFL-15A_15AE-N270_UMN_v1.01.pdf
- AFL-15A-N270 v1.03
- AFL-15A-N270 v2.10
- AFL-15A-N270 v2.20
- AFL-xxA-N26
- AFL-xxA-N270-Series v1.03
- AFL-xxA-N270-Series v2.00
- AFL-xxA-N270-Series v2.11
- AFL-xxA-N270-Series v2.20
- AFL-xxA-N270-Series v2.30
- AFL-W10A-N270 v1.00
- AFL-W10A-N270 v2.13
- AFL-W10A-N270 v3.10
- AFL-W10A-N270 v3.20
- AFL-08AH-N270
- AFL-07A 08AH 10A 12A-LX Series
- AFL-LX-Series v2.01
- AFL-LX-Series v2.10
- AFL-F08A v1.01
- AFL-F08A v2.21
- AFL-F08A v2.40
- AFL-08B-N270 v1.00
- AFL-08B-N270 v2.10
- AFL-08B-N270 v2.20
- AFL-08B-N270 v2.30
- AFL-057A-LX v1.02
- AFL-057A-LX v2.10
- AFL2-W21-H61
- AFL2-W19A-H61 v1.11
- AFL2-W19A-H61 v1.21
- AFL2-17A-H61 v1.02
- AFL2-17A-H61 v1.11
- AFL2-17A-H61 v1.23
- AFL2-W15B-H61
- AFL2-15A-H61
- AFL2-12A-HM65 v1.00
- AFL2-12A-HM65 v1.12
- AFL2-12A-D525
- AFL2-W15A-N270 v2.00
- AFL2-W15A-N270_W15A-L325 v1.01
- AFL2-W10A-N28
- AFL2-10A-N28
- AFL2-08A-N26
- AFL2-W07A-N26
- POC-17i_19i-Series_IEI
- IBS-19A
- Robot-TP-65M
- RPC-6022G
- RPC-6106_6108
- RPC-6010G
- EC-1040G
- LKM_Series
- IOVU-572M
- IOVU-752S
- IOVU-751R