IEI Integration AFL-F08A v2.10 User Manual
Page 66
![background image](/manuals/356407/66/background.png)
AFL-F08A-N270 Panel PC
Page 54
BIOS SETUP UTILITY
Main
Advanced
PCIPNP
Boot
Security
Chipset
Exit
Primary IDE Master
⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯
Device :Not Detected
Type
[Auto]
LBA/Large Mode
[Auto]
Block (Multi-Sector Transfer)
[Auto]
PIO Mode
[Auto]
DMA Mode
[Auto]
S.M.A.R.T. [Auto]
32Bit Data Transfer
[Enabled]
ÅÆ Select
Screen
↑ ↓ Select
Item
Enter Go to SubScreen
F1 General
Help
F10
Save and Exit
ESC Exit
v02.61 ©Copyright 1985-2006, American Megatrends, Inc.
BIOS Menu 5: IDE Master and IDE Slave Configuration
Î
Auto-Detected Drive Parameters
The “grayed-out” items in the left frame are IDE disk drive parameters automatically
detected from the firmware of the selected IDE disk drive. The drive parameters are listed
as follows:
Device: Lists the device type (e.g. hard disk, CD-ROM etc.)
Type: Indicates the type of devices a user can manually select
Vendor: Lists the device manufacturer
Size: List the storage capacity of the device.
LBA Mode: Indicates whether the LBA (Logical Block Addressing) is a method
of addressing data on a disk drive is supported or not.
Block Mode: Block mode boosts IDE drive performance by increasing the
amount of data transferred. Only 512 bytes of data can be transferred per
interrupt if block mode is not used. Block mode allows transfers of up to 64 KB
per interrupt.
PIO Mode: Indicates the PIO mode of the installed device.
Async DMA: Indicates the highest Asynchronous DMA Mode that is
supported.
Ultra DMA: Indicates the highest Synchronous DMA Mode that is supported.
S.M.A.R.T.: Indicates whether or not the Self-Monitoring Analysis and
Reporting Technology protocol is supported.
- UPC-V312-D525 v1.02
- UPC-V312-D525 v1.10
- UPC-12A_GM45 v1.00
- UPC-12A_GM45 v2.00
- UPC-12A_GM45 v2.10
- UPC-V315-NM70
- UPC-V315-Screw Driver
- UPC-V315-QM77
- S12ASR v1.12
- S12ASR v3.00
- PPC-5xxx-9455 v1.00
- PPC-5xxx-9455 v1.10
- PPC-WIDS-51xxA-G41
- PPC-51xxA-H61
- PPC-5152-D525 v1.02
- PPC-5152-D525 v2.10
- PPC-37xxA-N26 v1.00
- PPC-37xxA-N26 v1.10
- PPC-37xx-N270 v1.01
- PPC-37xx-N270 v2.00
- PPC-37xx-N270 v2.11
- PPC-37xx-N270 v2.20
- ACT-457A
- AFL-4 series-N270 v1.05
- AFL-4 series-N270 v2.10
- AFL-4 series-N270 v2.11
- AFL-4 series-N270 v2.20
- AFL-W19A_W19B_17D_W15A-GM45 v2.10
- AFL-W19A_W19B_17D_W15A-GM45 v1.06
- AFL-W19A_W19B_17D_W15A-GM45 v2.20
- AFL-W15A_17D-GM45 v3.00
- AFL-15i-HM55 v1.01
- AFL-19i-HM55 v2.00
- AFL-15i-HM55 v1.20
- AFL-W19A_W19B_17D_W15A-N270 v1.06
- AFL-W19A_W19B_17D_W15A-N270 v2.20
- AFL-W19A_17D_W15A-N270 v3.00
- AFL-15A_15AE-N270_UMN_v1.01.pdf
- AFL-15A-N270 v1.03
- AFL-15A-N270 v2.10
- AFL-15A-N270 v2.20
- AFL-xxA-N26
- AFL-xxA-N270-Series v1.03
- AFL-xxA-N270-Series v2.00
- AFL-xxA-N270-Series v2.11
- AFL-xxA-N270-Series v2.20
- AFL-xxA-N270-Series v2.30
- AFL-W10A-N270 v1.00
- AFL-W10A-N270 v2.13
- AFL-W10A-N270 v3.10
- AFL-W10A-N270 v3.20
- AFL-08AH-N270
- AFL-07A 08AH 10A 12A-LX Series
- AFL-LX-Series v2.01
- AFL-LX-Series v2.10
- AFL-F08A v1.01
- AFL-F08A v2.21
- AFL-F08A v2.40
- AFL-08B-N270 v1.00
- AFL-08B-N270 v2.10
- AFL-08B-N270 v2.20
- AFL-08B-N270 v2.30
- AFL-057A-LX v1.02
- AFL-057A-LX v2.10
- AFL2-W21-H61
- AFL2-W19A-H61 v1.11
- AFL2-W19A-H61 v1.21
- AFL2-17A-H61 v1.02
- AFL2-17A-H61 v1.11
- AFL2-17A-H61 v1.23
- AFL2-W15B-H61
- AFL2-15A-H61
- AFL2-12A-HM65 v1.00
- AFL2-12A-HM65 v1.12
- AFL2-12A-D525
- AFL2-W15A-N270 v2.00
- AFL2-W15A-N270_W15A-L325 v1.01
- AFL2-W10A-N28
- AFL2-10A-N28
- AFL2-08A-N26
- AFL2-W07A-N26
- POC-17i_19i-Series_IEI
- IBS-19A
- Robot-TP-65M
- RPC-6022G
- RPC-6106_6108
- RPC-6010G
- EC-1040G
- LKM_Series
- IOVU-572M
- IOVU-752S
- IOVU-751R