Yokogawa Button Operated DX2000 - Manual (Page 105)

3-44
IM 04L41B01-62EN
List of Settings
Refer to Section 3.3 for attributes without explanations in the list of settings.
Attribute Set value/choice
(Underlined items are initial
set values)
Description, conditions
X DX1000: 0 to 318
DX2000: 0 to 638 This is the X-coordinate of the left side of the component.
X = 0 for X < 0
X = (Max.
width *1 – Width) for (X + Width) > Max. width *1
Y DX1000: 24(0) to 238
DX2000: 40(0) to 478
( ) = Status area set to No
display
This is the Y-coordinate of the upper side of the component.
Y = Min. Y
*2 for Y < Min. Y *2
Y = (Min. Y *2 + Max. height *3 – Height) for (Y + Height) > (Min. Y *2 +
Max. height *3 )
Width DX1000: 2 to 320
DX2000: 2 to 640 This is the component width.
Width = 2 for width < 2
X = (Max. width*
1 – Width) for width < Max. width *1 and (X + Width) >
Max. width *1
Width = Max. width *1 , X = 0 for width ≥ Max. width *1
Height DX1000: 2 to 216(240)
DX2000: 2 to 440(480)
( ) = Status area set to No
display
This is the component height.
Height = 2 for height < 2
Y = (Max. height*
3 – Height) for height < Max. height *3 and (Y +
Height) > Max. height *3
Height = Max. height *3 , Y = 0 for height ≥ Max. height *3
Style [Selector], [Seesaw], [Lever],
[SlideX], [SlideY], [Push],
[Power], [Connector],
[Toggle]
This is the switch display kind.
Event level switch [1] to [30] —
Action prompt [Off], [On] This selects use/no use of dialog boxes confirming execution of an
action function.
Off: Dialog boxes are not used
On: Dialog boxes are used
Color [Red], [Green], [Blue],
[B.violet], [Brown], [Orange],
[Y.green], [Light blue], [Violet],
[Gray], [Lime], [Cyan], [Dark
blue], [Yellow], [Light gray],
[Purple], [Pink], [L.brown],
[L.green], [Dark gray], [Olive],
[Dark cyan], [S.green],
[Black], [White], [BASE]
This is the switch color.
BASE: Base color (background color of the screen)
On color Same choice as for “Color”,
[Cyan]
This is the color when the switch is ON.
The color at the time of ON is not displayed on the builder screen of
the DX recorder.
Off color Same choice as for “Color” This is the color when the switch is OFF.
The initial setting is [BASE].
String display [Off], [On] ON: Display of On Text and Off Text
Off: No display of On Text and Off Text
Font [Font5], [Font6], [Font8],
Font12], [Font16]
This is the size of On/Off text.
The initial setting is [Font6] for DX1000 and [Font8] for DX2000.
Gap [0] to [15] The interval between characters is specified in dots.
On string “ON” This is text showing ON.
Input of max. 8 single-byte characters is possible. ON Text is not
displayed on the execution screen of the DX recorder when “Style” is
[Push], [Power], or [Connector].
Off string “OFF” This is text showing OFF. Input of up to 8 single-byte characters is
possible.
*1 DX1000 max. width = 320, DX2000 max. width = 640
*2 DX1000 min. Y = 24(0), DX2000 min. Y = 40(0), ( ) = Status area set to No display
*3 DX1000 max. height = 216(240), DX2000 max. height = 440(80), ( ) = Status area set to No display
Synchronize action
►Section 3.3
3.21 Attributes of Switch Components