2 sending display data to dx recorder, 2 sending display data to dx recorder -3, Index – Yokogawa Button Operated DX2000 User Manual
Page 136
4-3
IM 04L41B01-62EN
1
2
3
4
5
Index
Communication with DX Recorder
4.2 Sending Display Data to DX Recorder
If the DX includes the /AS1 option, perform the DX main unit (with /AS1 option) settings
procedure in section 4.1 in advance.
Procedure
1.
Select
Communication > Send.
“Send” dialog box appears.
2.
Enter the IP address/host name of the DX recorder, the user name, and the
password.
IP address/Host name: Up to 64 single-byte alphanumeric characters can be entered.
User name:
Up to 20 alphanumeric characters can be entered. The initial setting
is “admin.”
User ID:
Up to 8 alphanumeric characters can be entered. This is only set if
the DX recorder includes the /AS1 option and the user ID is used.
([User ID] is only displayed on the version 4.01 and 4.11 screens.)
Password:
Up to 20 single-byte alphanumeric characters can be entered.
3.
Click
[Send].
A message is displayed.
4.
Click
[OK].
The opening display data (including editing display data) and bitmap files used for the
display data are sent to the DX recorder.