Yokogawa µR20000 - Manual (Page 27)

2-14
IM 04P01B01-61E
2.5 Setting the Computation Channels (/M1 Option)
Click the Math tab. You can also choose Math Channels from the Setting menu.
Tag Alarm delay time
Channel recording color (dot model)
Turning ON/OFF computation
Equation
Constants used
in equations
Click twice to unselect the channel.
Double-click to open a setup dialog box for the respective channel.
Drag the pointer while holding down the left mouse button to select multiple channels.
Recording span
Rightmost
value
Unit
Leftmost
value
Decimal point
position
Alarm 1
Output relay
number
Alarm value Alarm type
Sets the settings of the first channel in the selected
range to the other channels.
Partial expanded recording
Bar graph display mode
Turns ON/OFF periodic printout
Types of measured values
to be printed periodically
Turn trend recording ON/OFF (dot model)
Recording zone Alarm 4
Sets the default value.
Toggles ON/OFF collectively for each click.
Sets the minimum possible value.
Sets the maximum possible value.
The tool buttons apply to the selected range of channels when channels are selected.
They apply to all channels when a channel is not selected.