APC Battery Management System - Manual (Page 40)

®
USER’S GUIDE
Battery Management System
33
Option Settings
TCP/IP
This option accesses the following settings:
• Boot mode setting : Selects the method used to define the TCP/IP
values that a Battery Management System needs to operate on the
network:
– System IP : The IP address of the Battery Management System
– Subnet Mask : The subnet mask value
– Default Gateway : The IP address of the default gateway
• Advanced settings : Defines the Battery Management System’s host
and domain names, as well as Ethernet port speed, BOOTP, and
DHCP settings used by the Battery Management System.
Current TCP/IP settings fields.
The current values for System IP ,
Subnet Mask , and Default Gateway , and the Battery Management
System’s MAC Address , Host Name , Domain Name , and Ethernet Port
Speed values are displayed above the TCP/IP settings in the control
console and the Web interface.
For information about the watchdog role of the default
gateway, see
Resetting the network timer .
See also
To configure the initial TCP/IP settings when you install the
Battery Management System, see the Battery
Management System Installation and Quick Start Manual
(
.\doc\en\insguide.pdf ), provided on the APC Battery
Management System Utility CD and in printed form.