Brocade Fabric Watch Administrators Guide (Supporting Fabric OS v7.3.0) - Manual (Page 44)

Fabric Watch displays e-mail alert information such as:
Mail Recipient Information
____________________________________
Email Alert = enabled
Mail Recipient = [email protected]
The system returns to the main fwMailCfg menu.
Disabling an e-mail alert
1. Enter 2 in the fwMailCfg menu to disable e-mail alerts for a specific class.
2. Select a class for which Fabric Watch should disable e-mail alerts from the Config Show menu.
The following confirmation message displays:
Email Alert is disabled!
The system returns to the fwMailCfg menu.
Enabling an e-mail alert
1. Enter 3 in the fwMailCfg menu to enable e-mail alert for a specific class.
2. Select a class for which Fabric Watch should enable e-mail alerts from the Config Show menu.
The following confirmation message displays:
Email Alert is enabled!
If the class does not have an e-mail configuration (there is no e-mail address assigned to the class),
the following error message displays:
Mail configuration for class Environment is not done.
Email Alert is not enabled!
The system returns to the fwMailCfg menu.
NOTE
To ensure that the mail server address and domain name are configured correctly, use the
dnsConfig command. For more details, refer to the Fabric OS Command Reference.
Sending a test e-mail message
1. Enter 4 in the fwMailCfg menu to test the e-mail configuration for a specific class.
The Config Show menu displays.
2. Select a class to test.
If the e-mail configuration for the class is complete, the following confirmation message displays:
Email has been sent
If the e-mail configuration for the class is not complete, the following error message displays:
Email has not been sent.
Check Mail configuration for Environment class!
The e-mail address specified in the mail configuration receives a test e-mail message.
The system returns to the fwMailCfg menu.
Disabling an e-mail alert
44 Fabric Watch Administrators Guide
53-1003142-01