Brocade Fabric Watch Administrators Guide (Supporting Fabric OS v7.3.0) - Manual (Page 62)

Recommended settings for Fabric, SFP, Performance, and Security
classes
The table below lists the recommended settings for the Fabric, SFP, Security, and Performance
classes discussed in this document. For all of these classes, it is recommended that you use the
default settings.
Recommended Environment and Resource class settings TABLE 14
E=Error_Log, S=SNMP_Trap,
P=Port_LOG_LOCK,
M=EMAIL_ALERT, PF=Port
Fence
Trait Configuration
Class Area Default Unit Time
Base Low
Thresh High
Thresh Buffer Default Below Above
Fabric E_Port downs X Downs None 0 0 0 X
Fabric reconfig X Reconfigs None 0 0 0 X
Domain ID
changes X DID changes None 0 0 0 X
Segmentation X Segmentations None 0 0 0 X
Zone changes X Zone changes None 0 0 0 X
Fabric logins X Logins None 0 0 0 X
SFP Temperature X C None -10 85 3 X E E
RX power (RXP) X μWatts None 0 5000 25 X E E
TX power (TXP) X μWatts None 0 5000 25 X E E
Current X mA None 0 50 1 X E E
Voltage X μV None 2970 3630 10 X E E
PWR on Hours X Changes None 0 0 0 X E E
End-to-End
Performance RX performance X KB/s None 0 0 0 X
TX performance X KB/s None 0 0 0 X
Filter-based
Performance Custom filter
counter X Frames None 0 0 0 X
Security Telnet violations X Violations Minute 1 2 0 X E,S
Recommended settings for Fabric, SFP, Performance, and Security classes
62 Fabric Watch Administrators Guide
53-1003142-01