Password protection, Figure 28 supervisory modbus setup, Figure 29 password window – Detcon 1600A-N1P User Manual
Page 28: S in section 5.4, 4 password protection
1600A-N1P
When using the 1600A as a Modbus slave, press the “SUPERVISORY MODBUS” key to adjust Modbus
slave settings. See section 5.5 for Modbus slave settings.
Figure 28 Supervisory Modbus Setup
5.4 Password Protection
A simple form of Program Menu protection is provided to the end-user. This will allow the user to
functionally operate the unit, but will not allow the user the capability to change any important configuration
parameters.
When switching between the unprotected mode and the Program Menu protected mode, the user must touch
Program Menu, the User window(
), type ABCD, press “”, touch the Password window, type
ABCD, press “” ( Figure 30), touch OK.
Figure 29 Password Window
1600A-N1P Instruction Manual
Rev. 0.1
Page 24 of 40