KROHNE OPTIWAVE 5200 C_F EN - Manual (Page 127)

DESCRIPTION OF HART INTERFACE
9
127
OPTIWAVE 5200 C/F
www.krohne.com 07/2013 - 4001904902 - HB OPTIWAVE 5200 R02 en
For more data, refer to “readme.txt”. You can find this file in the Installation Kit.
9.8.2 Operation
There can be differences between the names of menus in the SIMATIC PDM software tool and
menus shown on the device display screen. Refer to the online help in SIMATIC PDM to find the
function number of each menu item. This function number agrees with the function number in
the device menus.
Use the same procedure for the protection of parameters in the supervisor menu.
9.9 HART ® menu tree for Basic-DD
Abbreviations of the following tables:
•
Opt
Optional, depending on device version and configuration
•
Rd
Read only
•
Cust
Custody lock protection
•
Loc
Local, affects only DD host views
9.9.1 Overview Basic-DD menu tree (positions in menu tree)
INFORMATION!
For more data, refer to HART
® menu tree for PDM on page 131 .
1 Measurements 1 Measurements
2 Outputs
2 Configuration and Test 1 Info. 1 Identification
2 Output
2 Supervisor 1 Test
2 Basis Parameters
3 Signal Out
4 Application
5 Display
6 Conversion Table
7 Reset
3 Diag/Service 1 Status 1 Standard Status
2 Device-specific Status
4 Access Rights 1 Access level
2 Method Login
3 Method entry Code
5 HART variables