KROHNE OPTIWAVE 5200 C_F EN - Manual (Page 16)

2
DEVICE DESCRIPTION
16
OPTIWAVE 5200 C/F
www.krohne.com 07/2013 - 4001904902 - HB OPTIWAVE 5200 R02 en
If the process connection temperature is more than +150°C / +302°F, the device has a high-
temperature (HT) extension. This is only available for Metallic Horn and Wave Guide antenna
options.
For more data about device options, refer to Technical data on page 99.
You can use the LCD display option or PACTware™ software installed on a computer or a
workstation for device configuration. The device configuration menu has a quick set-up wizard.
You usually will not need this document to install, set up and operate the device.
Figure 2-4: Types of antenna
1 PP Wave Horn antenna (G 1½ or 1½ NPT threaded connection only)
2 PTFE Wave Horn antenna (DN50...150 / 2¨...6¨ flange connections)
3 Metallic Horn antenna (available antenna sizes: DN80 (3¨), DN100 (4¨), DN150 (6¨) and DN200(8¨))
4 Wave Guide antenna (Length options: 1...6 m / 3.28...19.68 ft, in increments of 0.5 m / 1.64 ft)
Figure 2-5: Signal converter with the HT extension