KROHNE UFM 600T EN - Manual (Page 33)

LINING MAT.
(does not appear on display when lining = "NO")
Program the sonic velocity of the lining material.
The following 5 options are preprogrammed (or will reappear
after running 3.5.8 DEFAULT SET, see chapter D):
PVC : 2.1200 E 3 m/s
Other 1 : 1.0000 E 3 m/s
Other 2 : 1.0000 E 3 m/s
Other 3 : 1.0000 E 3 m/s
Other 4 : 1.0000 E 3 m/s
The sonic velocity can only be programmed in m/s.
Range:
3.0000 E 2 m/s
≤ Sonic velocity ≤ 4.7500 E 3 m/s
See appendix 1 for sonic velocities of some lining materials
used frequently.
All five option positions can be reprogrammed completely
according to the user's requirements (names and sonic
velocities).
LIQUID
Program the sonic velocity of the liquid inside the pipe.
The following 5 options are preprogrammed (or will reappear
after running 3.5.8 DEFAULT SET, see chapter D):
WATER : 1.5000 E 3 m/s
Other 1 : 1.0000 E 3 m/s
Other 2 : 1.0000 E 3 m/s
Other 3 : 1.0000 E 3 m/s
Other 4 : 1.0000 E 3 m/s
The sonic velocity can only be programmed in m/s.
Range:
1.0000 E 2 m/s
≤ Sonic velocity ≤ 2.5000 E 3 m/s
See appendix 2 for sonic velocities of frequently encountered
liquids.
All five option positions can be reprogrammed completely
32
ALTOSONIC
Operation
UFM 600 T