Milestone XProtect Smart Client 2013 - Manual (Page 89)

Milestone XProtect ® Smart Client
2014
User's Manual
www.milestonesys.com 89 Defining your views

You can quickly display an existing view (private or shared) from your XProtect Smart Client on
a monitor on a Smart Wall by dragging the view from the Views pane directly onto the monitor
in the graphical representation of the Smart Wall.

In the graphical representation of the Smart Wall, right-click the required monitor, select
Change View Layout, select the display format (4:3 or 16.9), and then select the view layout.

Select a different preset for the Smart Wall (note that this may affect all monitors in the Smart
Wall).
Remove content from a Smart Wall
You can quickly remove video (the entire monitor content or individual positions in a view) displayed
on Smart Wall monitors, for example, video containing sensitive information from the Smart Wall.
Remove the entire content of a monitor

In the graphical representation of the Smart Wall, right-click the monitor and select Clear
View. This will remove all video from the monitor while keeping the monitor's layout.
Remove video from a position in a view

In the graphical representation of the Smart Wall, right-click the position on the monitor and
select Remove from View. This will remove video from the position in the view while keeping
the monitor's other video content and layout.
What is displayed on a Smart Wall can be changed manually by other users or automatically
by predefined rules on the surveillance system. Therefore, even though you can manually
remove content from the Smart Wall, the content may reappear on the Smart Wall later.
Contact your surveillance server administrator if certain content should be prevented from
appearing on Smart Walls.