Milestone Basis+ 6.5 - Manual (Page 143)

Milestone XProtect Basis+ 6.5; Administrator’s Manual
3. Specify your login information in the following fields:
● Previous Logins: Only available if you have logged in before. Lets you reuse
previously specified login details (except any password, which you must always type
yourself). This can greatly speed up the login process.
● Address: Type the URL or IP address of the surveillance system server, as specified
by your system administrator.
● Port: Internet connections may use different ports for different purposes. Specify the
port number, your system administrator has asked you to use when logging in to the
Remote Client. In most circumstances, port 80 is used.
● Authentication: Select between different methods of authentication (i.e. the
process of verifying that you are who you claim you are). Consult your surveillance
system administrator if in doubt about which authentication method to use.
o
Windows (current user), with which you will be authenticated through
your current Windows login, and do not have to specify any user name or
password. This is the default authentication method, i.e. the method
which is automatically used unless you select another method.
o
Windows, with which you will be authenticated through your Windows
login, but you will need to type your Windows user name and password.
o
Basic, with which you will be authenticated through a user/password
combination defined on the surveillance system server.
● Username: Type your user name as specified by your system administrator. The
user name is case-sensitive, i.e. there is a difference between typing, for example,
amanda and Amanda.
● Password: Type your password as specified by your system administrator. The
password is case-sensitive.
4. Click the Login link.
www.milestonesys.com Page 143 Removal