Milestone Basis+ 6.5 - Manual (Page 56)

Milestone XProtect Basis+ 6.5; Administrator’s Manual
You are able to set the ellipse’s X-radius, Y-radius, X-center, and Y-center, either by specifying the
required values directly in the four fields or by using the following buttons to adjust the ellipse:
Button Description
R- Decreases the radius of the IPIX view field. The ellipse’s horizontal (X) and
vertical (Y) radiuses are changed at the same time, keeping the aspect ratio.
R+ Increases the radius of the IPIX view field. The ellipse’s horizontal (X) and
vertical (Y) radiuses are changed at the same time, keeping the aspect ratio.
Rx- Decreases the horizontal (X) radius of the ellipse.
Rx+ Increases the horizontal (X) radius of the ellipse.
Ry- Decreases the vertical (Y) radius of the ellipse.
Ry+ Increases the vertical (Y) radius of the ellipse.
X- Moves the ellipse to the left.
X+ Moves the ellipse to the right.
Y- Moves the ellipse up.
Y+ Moves the ellipse down.
Previewing the IPIX View
You are able to toggle between previewing the “fish eye” view and the IPIX-rendered view, i.e. the
original elliptic view as well as the “flattened” rectangular view resulting from applying the IPIX
algorithm according to your specified values. To toggle between the two different types of preview,
click the Toggle Preview button.
When previewing the IPIX-rendered view, the following navigation buttons become available for
moving around within the preview image area:
Moves the IPIX-rendered view up and to the left
Moves the IPIX-rendered view up
Moves the IPIX-rendered view up and to the right
Moves the IPIX-rendered view to the left
Moves the IPIX-rendered view to its home position
www.milestonesys.com Page 56 Camera Administration