LG LDG3015SW - Manual (Page 22)

21 HOW TO USE
ENGLISH
How to select Fahrenheit or Celsius
The oven temperature settings can either be set to
Fahrenheit or Celsius. The oven defaults to Fahrenheit unless
changed by the user.
1 Press the X key until “i” will display.
2 Press the number 1 key to select Fahrenheit or Celsius.
3 Press the q key to accept the change.
Minimum & Maximum default settings:
All of the features listed have minimum and maximum time
or temperature settings that may be entered into the control.
An entry acceptance beep will sound each time a control key
is pressed.
An entry error tone (two short tones) will sound if the entry of
the temperature or time is below the minimum or above the
maximum settings for the feature.
NOTE
y The time of day cannot be changed during a timed bak-
ing or Self Clean cycle.
y To check the time of day when the display is showing
other information, simply press the U key.
y If number keys are not pressed within 30 seconds after
you press the U key, the display reverts to the
original setting. If this happens, press the U key
and reenter the time of day.
y If the display time is blinking, you may have
experienced a power failure. Reset the time.
FEATURE MIN.
TEMP. /
TIME
MAX.
TEMP. /
TIME
DEFAULT
CLOCK TIME
12 Hr.
1:00 Hr. /
Min.
11:59 Hr. /
Min.
24 Hr.
0:00 Hr. /
Min.
23:59 Hr. /
Min.
KITCHEN
TIMER
12 Hr. 0:01 Min.
11:59 Hr. /
Min.
24 Hr. 0:01 Min.
11:59 Hr. /
Min.
COOKING
TIME
12 Hr. 0:01 Min.
11:59 Hr. /
Min.
24 Hr. 0:01 Min.
11:59 Hr. /
Min.
BROIL
TEMP. Lo-300°F /
149°C
Hi - 400°F /
204°C
3 Hr.
BAKE TEMP.
170°F /
77°C
550°F /
288°C
12 Hr.
PROOF 12 Hr.
WARM
170°F/75°C,
3 hours
3 Hr
SELF CLEAN 2 Hr. 4 Hr. 3 Hr.
How to Set the Clock (12 or 24 hour):
1 Press and hold the U key for three seconds.
2 Press the 1 key once for a 24 hour clock. Press it again for
a 12 hour clock.
3 Press the q key.
How to Set the Clock Time:
The clock must be set to the correct time of day in order for
the automatic oven timing functions to work properly.
1 Press the U key once.
2 Press the number keys to select the desired time.
Example : To set t, press the number keys 1, 2, 3 and 4
in that order.
3 Press the q key to accept the change.