Step 3 (discovery from hp se only), Build the topology, Building the topology view – HP Storage Essentials NAS Manager Software User Manual
Page 105: Bed in
Storage Essentials 5.00.01 User Guide
75
For example: 192.168.1.1:root/ibm, where 192.168.1.1 is the IP address of the tape library
and root/ibm is its namespace.
6.
Enter the User Name of the system running the tape library.
7.
Enter the Password of the system running the tape library.
8.
Retype the password in the Verify Password field.
9.
In the Comment field (optional), type a comment for additional information. The information
typed into this field is displayed under the Comment column in the Addresses to Discover list
(Tools > Storage Essentials > Home > Discovery > Setup).
10.
Do not select the Do Not Authenticate option.
11.
Click OK.
12.
To start discovering elements on the network, click the Start Discovery button on the IP
Addresses tab.
Step 3 (Discovery from HP SE Only) -
Build the Topology
This section is only for Discovery from HP SE, and it describes the following:
•
•
Modifying the Properties of a Discovered Address
•
Deleting Elements from the Product
Building the Topology View
After you discover elements, the management server requires you to build a topology view, which is
a graphical representation of port-level connectivity information.
If a switch has more than one connection to an element, the number of connections is displayed
above the line linking the switch and the element. For example, assume the number two is shown
between a switch and a storage system. This means the elements have two connections to each
other. To view the port details for the connection, right-click the element and select Show Port
Details
from the drop-down menu.
If the topology changes, you can update how the element is viewed in the topology by selecting the
element and clicking the Get Topology for Selected button in the Get Topology for discovered
elements page (from the HP SIM home page, click Tools > Storage Essentials > Home. The
Storage Essentials home page opens in a separate web browser window. Click Discovery >
Topology
in the upper right pane of the Storage Essentials home page). The management server
obtains just enough information about where the element is connected in the topology, for example
a switch connected to a host.
The management server marks an element with a question mark in the topology if the management
server detects an element but it cannot obtain additional information about it. To learn more about
fixing detected and/or disconnected elements, see the topic, ”