HP Storage Essentials NAS Manager Software User Manual
Page 332
Provisioning Manager
302
*Also applies to EMC Connectrix switches.
**Also applies to Sun StorEdge SNMP switches.
***SANbox-2 only
Issues for Sun StorEdge and QLogic SNMP (Simple Network Management Protocol) switches:
•
Active zoning is not reported for Sun StorEdge and QLogic switches that have the SNMPv1
Agent. Switches that do report active zoning, do not supply information about inactive zones to
the management server.
•
If a zone alias for a Sun StorEdge or QLogic switch is a member of an active zone, the zone
alias is not shown in the user interface, but its members are displayed as belonging to the active
zone.
Issues for Cisco SNMP and SMI-S (Storage Management Initiative Specification) switches:
•
The management server groups active zone sets in all Virtual SANs (VSANs) in a fabric into a
zone set called “ACTIVE”, and the “ACTIVE” zone set is shown associated with the physical
fabric. The members of the “ACTIVE” zone set (zones, zone sets, zone aliases) have the name of
the VSAN prefixed to their name. For example, an active zone named “ZONE1” from a VSAN
named “VSAN1” is displayed as a zone on the physical fabric with name “VSAN1:ZONE1”.
Cisco SMI-S switches:
•
You can view and create zones, zone sets and zone aliases on a Cisco SMI-S switch.
Cisco SNMP switches:
•
You can view zones, zone sets and zone aliases on a Cisco SNMP switch; however, you cannot
use the management server to create, modify or remove them from a Cisco switch.
Issues for McDATA and Connectrix switches:
*McDATA
SNMP to
switches
Y
N
N
N
Y
Cisco SNMP
Y
N
Y
N
Y
Cisco SMI-S
Y
Y
Y
Y
Y
CNT SMI-S
Y
Y
N
N
Y
**QLogic
SNMP
Y***
N
N
N
Y
**QLogic
SMI-S
Y
Y
Y
Y
Y
Table 46
Zoning Support
Switch
Type
Active
Zones
Inactive
Zones
Aliases
Zone/Zone Set
Provisioning
Port
Statistics