HP 9000 Virtual Library System - Manual (Page 175)

Status Description Item
Off = Power cord is not attached, power supply
failure has occurred, no power supplies are installed,
facility power is not available, or disconnected power
button cable.
Blue = Identification is activated. UID button/LED 2
Flashing blue = System is being remotely managed.
Off = Identification is deactivated.
Green = System health is normal. Internal health LED 3
Amber = System health is degraded. To identify the
component in a degraded state, refer to
HP Systems
Insight Display LEDs and Internal Health LED
Combinations
.
Red = System health is critical. To identify the
component in a critical state, refer to
HP Systems
Insight Display LEDs and Internal Health LED
Combinations
.
Off = System health is normal (when in standby
mode).
Green = Power supply health is normal. External health LED (power supply) 4
Amber = Power redundancy failure occurred.
Off = Power supply health is normal when in standby
mode.
Green = Network link exists. NIC 1 link/activity LED 5
Flashing green = Network link and activity exist.
Off = No link to network exists.
If power is off, the front panel LED is not active. View
the LEDs on the RJ-45 connector for status by referring
to
Rear Panel LEDs and Buttons .
Green = Network link exists. NIC 2 link/activity LED 6
Flashing green = Network link and activity exist.
Off = No link to network exists.
If power is off, the front panel LED is not active. View
the LEDs on the RJ-45 connector for status by referring
to
Rear Panel LEDs and Buttons .
Rear Panel Components
Description Item
Quad port FC card, storage port, port 4 1
Quad port FC card, storage port, port 3 2
Quad port FC card, host port, port 2 3
VLS9000 Node Components, LEDs, and Buttons 175