HP ProLiant DL360 G7 Server - Manual (Page 113)

Specifications 113
4600 at 200V to 240V AC input
Power supply output
Rated steady-state power 800 W at 100V AC input
900 W at 120V AC input
1200 W at 200V to 240V AC
input
Maximum peak power 800 W at 100V AC input
900 W at 120V AC input
1200 W at 200V to 240V AC
input
HP 1200 W CS -48Vdc Power Supply specifications
Specification Value
Input requirements
Rated input voltage -36V to -72V DC
-48V DC, nominal input
Rated input frequency Not applicable
Rated input current
38A at -36V DC
19A at -72V DC
28A at -48V DC, nominal input
Rated input power 1380 W at -36V DC input
1365 W at -72V DC input
1350 W at -48V DC, nominal
input
BTUs per hour 4713 at -36V DC input
4662 at -72V DC input
4610 at -48V DC, nominal input
Power supply output
Rated steady-state power 1200 W
Rated peak power 1200 W
CAUTION: This equipment is designed to permit the connection of the earthed conductor of the
DC supply circuit to the earthing conductor at the equipment. See installation instructions.
CAUTION: This equipment is designed to permit the connection of the earthed conductor of the
DC supply circuit to the earthing conductor at the equipment.
If this connection is made, all of the following must be met:
• This equipment should be connected directly to the DC supply system earthing electrode
conductor or to a bonding jumper from an earthing terminal bar or bus to which the DC supply
system earthing electrode conductor is connected.
• This equipment should be located in the same immediate area (such as adjacent cabinets) as
any other equipment that has a connection between the earthed conductor of the same DC
supply circuit and the earthing conductor, and also the the point of earthing of the DC system.
The DC system should be earthed elsewhere.
• The DC supply source is to be located within the same premises as the equipment.