Retaining the recovery key/password – HP ProLiant DL360 G7 Server User Manual
Page 66
Hardware options installation 66
5.
Install the TPM board. Press down on the connector to seat the board ("
" on
6.
Install the TPM security rivet by pressing the rivet firmly into the system board.
7.
Install the PCI riser board assembly (on page
8.
Install the access panel (on page
9.
Slide the server into the rack.
10.
Retaining the recovery key/password
The recovery key/password is generated during BitLocker™ setup, and can be saved and printed after
BitLocker™ is enabled. When using BitLocker™, always retain the recovery key/password. The recovery
key/password is required to enter Recovery Mode after BitLocker™ detects a possible compromise of system
integrity.
To help ensure maximum security, observe the following guidelines when retaining the recovery
key/password: