Redundant hot-plug power supply option – HP ProLiant DL360 G7 Server User Manual
Page 62
Advertising
Hardware options installation 62
10.
Install the graphics adapter in slot 2 on the PCI riser board assembly.
11.
Install the PCI riser board assembly (on page
12.
Connect the PCI power cable to the connector on the 150W graphics adapter and the system board.
13.
Install the air baffle (on page
14.
If removed, install the BBWC battery pack or the FBWC capacitor pack ("
pack or the FBWC capacitor pack
" on page
15.
Install the access panel (on page
16.
Slide the server into the rack.
17.
Redundant hot-plug power supply option
Advertising