HP Integrated Lights-Out - Manual (Page 102)

Using iLO 2 102
When using iLO 2 Text Console, iLO 2 can emulate character mapping between the client, telnet,
and the server. The default mapping is the USB 101-keyboard translation (or no translation).
To control the translation, use the xlt option with the appropriate reference number. For example to
set iLO 2 Text Console to a sampling rate of 50 ms using the translation of a British keyboard, enter:
textcons speed 50 xlt 41
To translate to another language, use one of the following:
Keyboard Reference number
United States 0
British 1
Belgian 2
Danish 3
Finnish 4
French 5
French Canadian 6
German 7
Italian 8
Latin American 9
Norwegian 10
Portuguese 11
Spanish 12
Swedish 13
Swiss - French 14
Swiss - German 16
• Configuring Remote Console hot keys
To use special key sequences that you cannot duplicate in the remote console client, the Remote
Console hot keys configured for Remote Console operate in iLO 2 Text Console. For more
information, see "Remote Console hot keys (on page 87 )."
• Configuring character mapping
In general, under the ASCII character set, CONTROL (ASCII characters than 32) are not printable
and cannot be displayed. These characters may be used to represent items such as arrows, stars, or
circles. Some of these characters are mapped to equivalent ASCII representations. The following are
supported equivalents:
Character value Description Mapped equivalent
0x07 Small dot *
0x0F Sun *
0x10 Right pointer >
0x11 Left pointer <
0x18 Up arrow ^
0x19 Down arrow v
0x1A Left arrow >
0x1B Right arrow >