HP Integrated Lights-Out - Manual (Page 190)

Troubleshooting iLO 2 190
Event log display Event log explanation
Host server reset by: User Displays when a user resets the host server.
Host server powered OFF by: User Displays when a user powers off a host server.
Host server powered ON by: User Displays when a user powers on a host server.
Virtual Floppy in use by: User Displays when a user begins using a Virtual Floppy.
Remote Console login: User Displays when a user logs on a Remote Console
session.
Remote Console Closed Displays when a Remote Console session is closed.
Failed Console login - IP Address: IP address Displays a failed console login and IP address.
Added User: User Displays when a local user is added.
User Deleted by: User Displays when a local user is deleted.
Modified User: User Displays when a local user is modified.
Browser login: User Displays when a valid user logs on to iLO 2 using
an Internet browser.
Browser logout: User Displays when a valid user logs off iLO 2 using an
Internet browser.
Failed Browser login – IP Address: IP address Displays when a browser login attempt fails.
Remote Console login: User Displays when an authorized user logs on using the
Remote Console port.
Remote Console Closed Displays when an authorized Remote Console user
is logged out or when the Remote Console port is
closed following a failed login attempt.
Failed Console login – IP Address: IP address Displays when an unauthorized user has failed three
login attempts using the Remote Console port.
Added User: User Displays when a new entry is made to the
authorized user list.
User Deleted by: User Displays when an entry is removed from the
authorized user list. The User section displays the
user who requested the removal.
Event Log Cleared: User Displays when the user clears the Event Log.
Power Cycle (Reset): User Displays when the power has been reset.
Virtual Power Event: User Displays when the Virtual Power Button is used.
Security Override Switch Setting is On Displays when the system is booted with the Security
Override Switch set to On.
Security Override Switch Setting
Changed to Off Displays when the system is booted with the Security
Override Switch changed from On to Off.
On-board clock set; was previously [NOT SET]" Displays when the on-board clock is set. Will
display the previous time or "NOT SET" if there was
not a time setting previously.