HP LaserJet 4250 - Manual (Page 178)

Control panel message Description Recommended action
ROM DISK IS
WRITE PROTECTED
To clear press
alternates with
<current status
message>
The disk is protected, and no new files
can be written to it. Use the Device Storage Manager in
HP Web Jetadmin to disable the write
protection.
ROM DISK NOT
INITIALIZED
To clear press
alternates with
<current status
message>
The file system has not been initialized. Use HP Web Jetadmin to initialize the
file system.
SANITIZING DISK
<X>% COMPLETE
Do not power off
alternates with
CLEANING DISK
<X>% COMPLETE
For help press
A hard disk or a CompactFlash card is
being sanitized. No action necessary.
SIZE MISMATCH IN
TRAY XX
For help press
alternates with
<current status
message>
The tray indicated is loaded with a
different size of paper than the size
configured for the tray. Load the tray with the size configured for
the tray.
Make sure that the guides are positioned
correctly in the tray, and then make sure
that the knob is set correctly to Standard
or Custom.
STAPLER LOW
ON STAPLES
Fewer than 70 staples remain in the
optional stapler/stacker cartridge.
Printing continues until the cartridge runs
out of staples, and the STAPLER OUT
OF STAPLES message appears on the
printer control panel display. Replace the staple cartridge. For
information about replacing the staple
cartridge, see
Loading staples . For
information about ordering a new staple
cartridge, see
Part numbers .
Interpreting control-panel messages (continued)
166 Chapter 4 Problem solving ENWW