HP LaserJet 4250 - Manual (Page 225)

Configure Device menu
This menu contains administrative functions.
Printing submenu
Print Quality submenu
System Setup submenu
Stapler/stacker submenu
I/O submenu
Resets submenu
Printing submenu
Some items on this menu are available in the program or printer driver (if the appropriate
driver is installed). Program and printer driver settings override control-panel settings. In
general, it is better to change these settings in the printer driver, if applicable.
The section that follows lists the settings and possible values. In the Values column, the
default value for each setting is the one with an asterisk (*) next to it.
Item Values Explanation
COPIES *1 to 32000 Sets the default number of copies by selecting
any number from 1 to 32000. Use (
U P
button ) or ( D
OWN
button) to select the number
of copies, or use the numeric keypad, if
available, to specify the number of copies.
Use ( S
ELECT
button) after specifying the
number of copies. The Setting saved message
appears.
This setting applies only to print jobs that do not
have the number of copies specified in the
program or printer driver, such as an MS-DOS,
UNIX, or Linux application.
NOTE
It is best to set the number of copies in the
program or printer driver. (Program and printer
driver settings override control-panel settings.)
ENWW Configure Device menu 213