HP LaserJet 4250 - Manual (Page 32)

To set the Sleep Delay
1. Press M
ENU
to open the menus.
2. Press ( D
OWN
button) to highlight CONFIGURE DEVICE.
3. Press ( S
ELECT
button) to select CONFIGURE DEVICE.
4. Press ( D
OWN
button) to highlight SYSTEM SETUP.
5. Press ( S
ELECT
button) to select SYSTEM SETUP.
6. Press ( D
OWN
button) to highlight SLEEP DELAY.
7. Press ( S
ELECT
button) to select SLEEP DELAY.
8. Press ( U
P
button) or ( D
OWN
button) to select the appropriate time period.
9. Press ( S
ELECT
button) to set the time period.
10. Press M
ENU
to exit the menu.
To turn the Sleep Mode on or off
1. Press M
ENU
to open the menus.
2. Press ( D
OWN
button) to highlight CONFIGURE DEVICE.
3. Press ( S
ELECT
button) to select CONFIGURE DEVICE.
4. Press ( D
OWN
button) to highlight RESETS.
5. Press ( S
ELECT
button) to select RESETS.
6. Press ( D
OWN
button) to highlight SLEEP MODE.
7. Press ( S
ELECT
button) to select SLEEP MODE.
8. Press ( U
P
button) or ( D
OWN
button) to select ON or OFF.
9. Press ( S
ELECT
button) to set the selection.
10. Press M
ENU
to exit the menu.
Personality
This printer features automatic personality (printer language) switching.
● AUTO configures the printer to automatically detect the type of print job and configure its
personality to accommodate that job. This is the default setting. Use this setting unless
you are experiencing problems.
● PCL configures the printer to use Printer Control Language.
● PDF configures the printer to print .PDF files. (This option is only available the printer
has sufficient memory.)
● PS configures the printer to use PostScript emulation.
20 Chapter 1 Printer basics ENWW