GReddy e-Manage Ultimate Installation Manual - Manual (Page 19)

18
11. Ignition Signal Wire
Ч Ч
26 pin connector
*On Honda EG type vehicles, there are
2 ignition signals in the 26 pin connector.
Group the 2 together as shown above.
Honda Distributer (with 2 signal) Distributer Type Ignition
When changing the IG channel
example: to convert a group ignition system to direct ignition system.
How to connect
• Connect the necessary IG CH OUT wires to
the Connector A.
• Pleasse refer to the Igniton firing order chart
and Harness Diagram for proper wiring order.
• Confirm the injector wiring to match the
ignition method.
ECU
(Engine Control Unit)
Female Connector
Male Connector
Splice
Blue/Black (IG CH-1 OUT)
Orange/Black (IG CH-2 OUT)
Yellow/Black (IG CH-3 OUT)
Purple/Black (IG CH-4 OUT)
Blue/White (IG CH-1 IN)
Orange/White (IG CH-2 IN)
ECU
(Engine Control Unit)
Blue/White (IG CH-1 IN)
Blue/Black (IG CH-1 OUT)
Blue/White (IG CH-1 IN)
Blue/Black (IG CH-1 OUT)
Female Connector
Male Connector
Splice
Connector A
Connector A
Connector A