Setting time – Vaisala GMP343 User Manual
Page 38
![background image](/manuals/408536/38/background.png)
User’s Guide ______________________________________________________________________
36 ___________________________________________________________________M210514EN-E
Example 1:
>form CO2 " " "ppm" #r#n
>save
EEPROM saved successfully.
>send
336.3 ppm
Example 2:
>form "Filtered data" CO2 "ppm" #r#n
>save
EEPROM saved successfully
>
>send
Filtered data 336.9ppm
>
Example 3 (both filtered and raw data chosen):
>form CO2 "ppm" " " CO2RAWUC "ppm" #r#n
>send
296.5ppm 270.1ppm
Setting Time
TIME x <cr>
SAVE <cr>
x=hh:mm:ss
Time passed since the last power on was displayed. Time always resets to
00:00:00 when power is switched off. However, the user can set the time.
Example (time inquiry):
>time
04:00:52
>
Example (time setting):
>time 12:15:00
12:15:00
>time
12:15:02
>
>save
EEPROM saved successfully.
>