ADC SG-1 - Manual (Page 100)

Chapter 7: Second Level Commands June 30, 2006
7-20 SG1-UM-8500-03
Configuring a single PVC
This command creates a permanent virtual circuit (PVC) on an ATM interface.
Usage
atm pvc <vpi> <vci> <slot> <port> <sub-interface> [name <pvc name>] | [ OAM
<on|off|on-cc> | ubr <peak cell rate>]
Parameter(s)
<vpi>
The virtual path identifier (valid values 0 - 255).
<vci>
The virtual channel identifier (valid values 32 - 2032).
<slot>
The value 2 is required to select the SONET/SDH interface.
<port>
The port on which the circuit is to be created (valid values 1 and 2).
<sub-interface>
A logical interface number that can be used to group circuits (valid values 1 - 2000).
[name <name>]
A 1 to 64 character alpha-numeric identifier that can be assigned to a circuit for tracking purposes.
Host(config)# atm pvc