Displaying show mpls l2transport vc commands, Displaying a list of available write commands – ADC SG-1 User Manual
Page 62
Chapter 6: First-Level Commands
6-26
Displaying show mpls l2transport vc commands
It shows confine redirected interface traffic through MPLS l2vpn tunnel based on Martini draft.
Example(s)
Displaying a list of available write commands
This command shows the available write commands enabled on the SCC.
Usage
write [<memory>] | [<network><ip address><alpha numeric string>] | [<terminal>]
Parameter(s)
<memory>
Writes running configuration (volatile memory) to start-up configuration (non-volatile).
<network>
Writes running configuration to a TFTP server.
<ip address>
IP address of TFTP server.
<alpha numeric string>
Name to be used for configuration saved to a TFTP server.
<terminal>
Writes running configuration to terminal screen.
Host> show mpls l2transport vc
Host> show mpls l2transport vc
Dest address
VC ID
Status Type
194.90.1.4
200
UP redirect
194.90.1.4
201
UP redirect
Host> write ?