ADC SG-1 User Manual
Page 121
Chapter 7: Second Level Commands
7-41
Configuring the primary DNS
Usage
ip primary-name-server <IP address>
Example(s)
Configuring the secondary DNS
Usage
ip secondary-name-server <IP address>
Example(s)
Setting tunnel servers
Each IAS (Internet Access Switch) which will send its users to the SG-1 must be configured in the SG-1 (or several
IAS which are in the same Mask and use the same tunnel password). The tunnel-server host command is used to
configure the tunnel server (IAS) settings.
Usage
tunnel-server host <IP address> mask <mask> [password <alpha-numeric string>]
After keying in the above string, the tunnel password is encrypted.
Parameter(s)
<IP address>
The LAC machine IP address.
Host(config)# ip primary-name-server
Host(config)# ip primary-name-server 55.12.1.24
Host(config)# ip secondary-name-server
Host(config)# ip secondary-name-server 55.12.1.24
Host(config)# tunnel-server