Apple ColorLaserWriter 12/600PS - Manual (Page 37)

Installing the photoconductor cartridge and toner disposal box
The photoconductor is a photosensitive device that captures an image in toner
and transfers it to the paper. The toner disposal box is where the printer
deposits any excess toner powder. You’ll find a photoconductor cartridge and
two toner disposal boxes in the printer setup kit.
IMPORTANT The photoconductor is sensitive to light. Do not open the package
until you are ready to install the photoconductor cartridge. Inside the foil bag,
the photoconductor cartridge sits in an orange protective tray designed to
make installation easy and to protect the photoconductor from being touched
or exposed to light. Do not take the photoconductor cartridge out of the tray.
If you scratch the photoconductor, the marks can appear on every page you
print (until you replace the photoconductor cartridge). Prolonged exposure to
light shortens the life of the photoconductor.
1 Push the transfer drum lever down and to the right.
This releases a locking mechanism.
Push the transfer drum lever to the right.
12 Chapter 1