Edsal MRWB-6 - Manual

Safety Instructions Safety Instructions Safety Instructions
These units should be placed on a level surface. Failure to do so can result in poor product performance or create a
possible safety hazard. This unit should be securely anchored to a wall or floor with suitable fasteners, which are not
included. Do not use this unit for anything other than the manufactures intended purpose. DO NOT STAND ON ANY
PART OF THE UNIT, OR USE IT AS A LADDER. Evenly distribute the weight on each level and always keep the
heavier loads on the bottom. Use care when working with metal parts.
Heavy Duty 6’
Work Bench
MODEL NUMBER
MRWB - 6
MRWB MRWB MRWB - - - 6 3 Shelf 2 Drawer 6 3 Shelf 2 Drawer 6 3 Shelf 2 Drawer - - - 60”h x 24”d x 72”w 60”h x 24”d x 72”w 60”h x 24”d x 72”w
Description
Long Post
Brace
Beam
Short Post
Shelf Support
Top Shelf Beam
Drawer Mount
Drawer Slide
Drawer Shelf Braces
Peg Board
Wood Shelf
Center Bracket
Center Drawer Mount
Peg Board Bracket
Wood Drawer Shelf
Wood Top Shelf
Hardware
Qty.
2
4
5
2
2
1
2
4
4
1
2
2
2
2
2
1
12
Part Number
RUPT6002
RWBE2303
RWBE7103
RUPT3602
RWSB2801
RWSS8903
RWDM2305
RWDS2003
RWDB3102
PGBD7120
RLPB2472
RWBR0303
RWDM2303
RWPB0401
RPB23217
RPB2729
NB12
Part Size
60”
24”
72”
36”
N/A
N/A
N/A
N/A
32”
20” x 72”
24” x 72”
N/A
N/A
N/A
32” x 17”
9” x 72”
#10-24
General Instructions General Instructions General Instructions
Assembly is done with the rivets of the beams and braces fitting into the slots of the post. A rubber mallet may be used
on the beams and braces to seat the rivets properly. A hammer can also be used, providing one uses a cloth or a block
of wood between the hammer head and the parts to prevent damage. Tap gently and be sure the rivets are straight and
fully engaged.
Should you have any comments, damage, missing parts, or problems with assembly of this unit please feel
free to contact our Edsal manufacturing facility at, (773) 475-3000 and request customer service. We can
also be reached on the internet at the following email address : [email protected].
To obtain replacement parts, please provide the following information :
- Model # - Part # & Description - Location Purchased - Date Purchased
Consumer Products Division
Edsal Manufacturing Company
4400 South Packers Avenue
Chicago, IL 60609 www.edsal.com
Heavy Duty Work Bench