Festo Контроллер позиционирования CPX-CMPX - Manual (Page 39)

1. Overview of components
1−21
Festo P.BE−CPX−SYS−EN en 0902e
Interlinking blocks
M18 or 7/8" Description
Types CPX−(M−)GE−EV −S...
Interlinking blocks in plastic and metal version with system supply, of
which precisely one of each must be available for each CPX terminal.
Ĉ Operating voltage for internal electronics and for the internal electronics
of the CP modules connected to the CPX−CP interface
Ĉ Sensor supply for internal input modules and for the CP input modules
connected to the CPX−CP interface
Ĉ Load voltage supply for internal output modules and valves
Ĉ Load voltage supply for the CP modules connected to the CPX−CP interĆ
face
Types CPX−(M−)GE−EV −Z... 1)
Interlinking blocks in plastic and metal version with additional power
supply for electrical outputs
Ĉ Load voltage supply for the output module inserted and for the
subsequent output modules inserted to the right.
Type CPX−GE−EV −V... 1) 2)
Interlinking blocks with additional power supply for valves
Ĉ Load voltage supply for the pneumatic modules/valves inserted
subsequently to the right.
Ĉ Load voltage supply for CP modules which are connected to the fitted
CPX−CP interface and to those CPX−CP interfaces subsequently fitted to
the right
1) Optional − depends on the current consumption of the CPX modules and the connected compoĆ
nents.
2) Not available for all alternative connections.
Tab. 1/5: Interlinking blocks with supply (M18 or 7/8")