Kramer Electronics RC-IR2 - Manual (Page 22)

Operating in the Scaler Mode
19
8 Operating in the Scaler Mode
The RC-IR2 includes the main 1 SCALER functions; other functions can only
be accessed via the OSD menu keys.
To recognize a Kramer machine when operating in the Scaler Mode, using the
RC-IR2, point the remote control transmitter at the remote receiver and do the
following:
1. Press the SCALER key.
2. Press the appropriate # key (from 1 to 5), according to the following:
For VP-720xl, press 1
For VP-719xl, press 2
For VP-723xl, press 3
For VP-724xl, press 4
For VP-725DS and VP-725DSA, press 5
The LED lights once.
The RC-IR2 is set to Scaler Mode and operates the appropriate machine.
Once the scaler model is selected (using the numeric keys from 1 to 5), you
can use the selector buttons from 1 to 18 to select the source.
8.1 The Volume keys in the SCALER Mode
Use the VOL+ and VOL- keys to increase or decrease the volume. For the
VP-725DS and VP-725DSA, the VOL+ and VOL- keys are used to adjust the
MASTER AUDIO OUTPUT. You can adjust the volume of the other groups
via the OSD menu.
9 Technical Specifications
Table 9 lists the technical specifications:
Table 9: Technical Specifications
2
of the RC-IR2
Remote Control Transmitter RC-IR2 External Remote Receiver
Dimensions: 4.5 cm (W) x 2.2 cm (D) x 17.6 cm (H) 8.5 cm (W) x 8.5 cm (D) x 9.5 cm (H)
Power
Source:
2 AAA size regular 1.5V alkaline batteries
Remote current: 10mA maximum Power adapter (12V DC Input)
28 mA maximum
Accessories: Batteries Attached RS-232 Cable and
connector
Power adapter
1 The functions of the SCALER keys are detailed in Table 1
2 Specifications are subject to change without notice